 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| T1635H, T1650H SnubberlessTM High temperature 16 A Triacs Main characteristics Symbol IT(RMS) VDRM/VRRM IGT Value 16 600 35 or 50 Unit G A2 A1 A2 A2 A V mA A2 A1 G G A2 A1 Features Medium current Triac 150 C max. Tj turn-off commutation Low thermal resistance with clip bonding Very high 3 quadrant commutation capability Packages are RoHS (2002/95/EC) compliant D2PAK T16xxH-6G TO-220AB T16xxH-6T Applications A1 G A2 Especially designed to operate in high power density or universal motor applications such as vacuum cleaner and washing machine drum motor, these 16 A triacs provide a very high switching capability up to junction temperatures of 150 C. The heatsink can be reduced, compared to traditional triacs, according to the high performance at given junction temperatures. TO-220AB Insulated T16xxH-6I Order codes Part Numbers T1635H-6G T1650H-6G T1635H-6G-TR T1650H-6G-TR T1635H-6T T1650H-6T T1635H-6I T1650H-6I Marking T1635H 6G T1650H 6G T1635H 6G T1650H 6G T1635H 6T T1650H 6T T1635H 6I T1650H 6I Description Available in through-hole or surface mount packages, the T1635H and T1650H triac series are suitable for general purpose mains power AC switching. TM: Snubberless is a trademark of STMicroelectronics May 2007 Rev 1 1/10 www.st.com 10 Characteristics T1635H, T1650H 1 Table 1. Symbol IT(RMS) Characteristics Absolute Maximum Ratings Parameter D2PAK, TO-220AB RMS on-state current (full sine wave) TO-220AB Ins Non repetitive surge peak on-state current (full cycle, Tj initial = 25 C) It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Non repetitive surge peak off-state voltage Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range F = 50 Hz F = 60 Hz tp = 10 ms F = 120 Hz tp = 10 ms tp = 20 s Tj = 150 C Tj = 25 C Tj = 150 C Tj = 150 C Tc = 130 C Tc = 110 C t = 20 ms t = 16.7 ms 160 A 168 169 50 VDRM/VRRM + 100 4 1 - 40 to + 150 - 40 to + 150 As A/s V A W C Value 16 Unit A ITSM I t dI/dt VDSM/VRSM IGM PG(AV) Tstg Tj Table 2. Symbol IGT (1) VGT VGD IH (2) IL dV/dt (2) (dI/dt)c (2) Electrical Characteristics (Tj = 25 C, unless otherwise specified) Value Test Conditions Quadrant T1635H VD = 12 V RL = 33 VD = VDRM, RL = 3.3 k IT = 500 mA I - III IG = 1.2 IGT VD = 67% VDRM, gate open, Tj = 150 C Without snubber, Tj = 150 C MAX. II MIN. MIN. 80 1000 21 110 1500 28 V/s A/ms I - II - III I - II - III I - II - III MAX. MAX. MIN. MAX. 35 50 35 1.0 0.15 75 90 mA T1650H 50 mA V V mA Unit 1. minimum IGT is guaranted at 20% of IGT max. 2. for both polarities of A2 referenced to A1. 2/10 T1635H, T1650H Table 3. Symbol VT (1) Vt0 Rd (1) (1) Characteristics Static Characteristics Test Conditions ITM = 23 A, tp = 380 s Threshold voltage Dynamic resistance VDRM = VRRM Tj = 25 C Tj = 150 C Tj = 150 C Tj = 25 C Tj = 150 C MAX. MAX. MAX. MAX. MAX. MAX. MAX. Value 1.5 0.80 23 5 4.1 3.5 3.0 mA Unit V V m A IDRM IRRM(2) VD/VR = 400 V (at peak mains voltage) Tj = 150 C VD/VR = 200 V (at peak mains voltage) Tj = 150 C 1. for both polarities of A2 referenced to A1 2. tp = 380 s. Table 4. Symbol Rth(j-c) Thermal resistance Parameter D2PAK / TO-220AB Junction to case (AC) TO-220AB Ins S=1 cm2 D2PAK TO-220AB / TO-220AB Ins Junction to ambient 60 3.1 C/W 45 Value 1.15 Unit Rth(j-a) Figure 1. P(W) 18 16 14 12 10 8 6 4 2 0 0 1 2 3 =180 Maximum power dissipation versus Figure 2. RMS on-state current (full cycle) IT(RMS) (A) 18 RMS on-state current versus case temperature (full cycle) TO-220AB/DPAK 16 14 12 10 8 6 180 TO-220AB Insulated 4 2 =180 IT(RMS)(A) 4 5 6 7 8 9 10 11 12 13 14 15 16 0 0 25 50 TC(C) 75 100 125 150 3/10 Characteristics T1635H, T1650H Figure 3. RMS on-state current versus ambient temperature (Epoxy printed circuit board FR4, copper thickness = 35 m) =180 DPAK SCU=1 cm Figure 4. Variation of thermal impedance versus pulse duration IT(RMS) (A) 4.5 4.0 3.5 3.0 2.5 1.0E+01 1.0E+02 Zth(C/W) Zth(j-a) Zth(j-c) 2.0 1.5 1.0 0.5 0.0 0 25 50 Tamb(C) 75 100 125 150 tP(s) 1.0E-01 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 1.0E+00 Figure 5. 1000 On-state characteristics (maximum Figure 6. values) 180 160 140 Surge peak on-state current versus number of cycles ITM(A) ITSM (A) Non repetitive Tj initial=25 C t=20ms 100 Tj=150 C 120 100 80 Tj=25 C Repetitive Tc=110 C One cycle 10 60 40 Tj max. : Vt0 = 0.80 V Rd = 23 m 20 0 Number of cycles 1 10 100 1000 1 0.0 0.5 1.0 1.5 VTM(V) 2.0 2.5 3.0 3.5 4.0 4.5 Figure 7. Non-repetitive surge peak on-state Figure 8. current for a sinusoidal pulse with width tp < 10 ms and corresponding value of I2t 2.5 Tj initial=25 C Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) 10000 ITSM(A), It (As) IGT, IH, IL [T j] / IGT, IH, IL [T j=25C] dI/dt limitation: 50 A/s 2.0 IGT 1.5 1000 IH & IL 1.0 ITSM It 0.5 Tj(C) 0.0 tP(ms) 100 0.01 0.10 1.00 10.00 -40 -20 0 20 40 60 80 100 120 140 160 4/10 T1635H, T1650H Characteristics Figure 9. Relative variation of critical rate of decrease of main current (dI/dt)c versus reapplied (dV/dt)c (typical values) Figure 10. Relative variation of critical rate of decrease of main current versus junction temperature (dI/dt)c [T j] / (dI/dt)c [T j=150C] 8 7 6 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 (dI/dt)c [ (dV/dt) c ] / Specified (dI/dt) c 5 4 3 2 0.4 0.2 0.0 0.1 1.0 (dV/dt)C (V/s) 0 1 T j(C) 10.0 100.0 25 50 75 100 125 150 Figure 11. Leakage current versus junction temperature for different values of blocking voltage (typical values) Figure 12. Variation of thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness = 35 m) Rth(j-a) (C/W) 80 DPAK 1.0E+04 IDRM/IRRM(A) 1.0E+03 VDRM=VRRM=400 V VDRM=VRRM=600 V 70 60 1.0E+02 VDRM=VRRM=200 V 50 40 30 20 1.0E+01 1.0E+00 10 1.0E-01 50 75 T j(C) 100 125 150 SCU(cm) 0 0 5 10 15 20 25 30 35 40 5/10 Ordering information T1635H, T1650H 2 Ordering information T 16 xx H - 6 y Triac series Current 16 = 16 A Sensitivity 35 = 35 mA 50 = 50 mA High temperature Voltage 6 = 600 V Package G = D2PAK T = TO-220AB I = TO-220AB Ins Packing Blank = Tube (D2PAK, TO-220AB) -TR = Tape and reel (D2PAK) -TR 6/10 T1635H, T1650H Package mechanical data 3 Package mechanical data Epoxy meets UL94, V0 Recommended torque 0.4 to 0.6 Nm D2PAK dimensions Dimensions Ref. Millimeters Min. A A E L2 C2 Table 5. Inches Min. 0.169 0.098 0.001 0.027 0.048 0.055 Typ. Max. 0.181 0.106 0.009 0.037 Typ. Max. 4.60 2.69 0.23 0.93 4.30 2.49 0.03 0.70 1.25 0.45 1.21 8.95 10.00 4.88 15.00 1.27 1.40 0.40 0 1.40 A1 A2 B D L L3 A1 B2 C C2 0.60 1.36 9.35 0.017 0.047 0.352 0.024 0.054 0.368 0.405 0.208 0.624 0.055 0.069 0.016 B2 B G C R D E 10.28 0.393 5.28 0.192 A2 2mm min. FLAT ZONE G L V2 15.85 0.590 1.40 1.75 0.050 0.055 L2 L3 R V2 8 0 8 Figure 13. Footprint (dimensions in mm) 16.90 10.30 1.30 5.08 8.90 3.70 7/10 Package mechanical data Table 6. TO-220AB and TO-220AB Ins dimensions T1635H, T1650H Dimensions Ref. Millimeters Min. A a1 B OI L F A I4 l3 a1 l2 c2 b2 C Inches Min. Typ. Max. 0.625 0.147 Typ. Max. 15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75 15.90 0.598 a2 B b1 b2 C c1 c2 14.00 0.511 10.40 0.393 0.88 0.024 1.32 0.048 4.60 0.173 0.70 0.019 2.72 0.094 2.70 0.094 6.60 0.244 3.85 0.147 0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.106 0.259 0.151 a2 e M F c1 b1 e OI I4 L l2 l3 M 15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 1.14 2.60 2.95 0.104 1.70 0.044 1.70 0.044 0.102 0.116 0.066 0.066 In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 8/10 T1635H, T1650H Ordering Information 4 Ordering Information Ordering type T16xxH-6G T16xxH-6G-TR T16xxH-6T T16xxH-6I Marking T16xxH 6G T16xxH 6G T16xxH 6T T16xxH 6I Package D2PAK D PAK TO-220AB TO-220AB Ins 2 Weight 1.5 g 1.5 g 2.3 g 2.3 g Base qty 50 1000 50 50 Delivery mode Tube Tape and reel Tube Tube 5 Revision history Date 29-May-2007 Revision 1 First issue Description of Changes 9/10 T1635H, T1650H Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 |
Price & Availability of T1650H-6G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |